How to make the impact point of the scope in the center of the lens

In the process of using the optical sight, sometimes we will find such a situation, the position of the central scale line in the scope lens is not in the center of the lens, and the left and right up and down deviations occur. The scale line is not in the center, aiming at The impact point of the mirror is not where we intended, how can this be done?

In the process of using the optical sight, sometimes we will find such a situation, the position of the central scale line in the scope lens is not in the center of the lens, and the left and right up and down deviations occur. The scale line is not in the center, aiming at The impact point of the mirror is not where we intended, how can this be done?

Don't worry, we can adjust the impact point of the scope by adjusting the ballistic supplementary adjustment button in the scope.

The adjustment method is as follows:

The adjustment knob located above the scope is the ballistic compensation adjustment knob, which is usually marked with an arrow and marked with the letter 'u', which means to rotate the knob in the direction of the arrow, and the impact point will be adjusted upward in the vertical direction, and u means up. means; the opposite

The adjustment knob on the right is the wind deflection adjustment knob, usually with an arrow drawn on it, marked with the letter 'L', which means to adjust the knob in the direction of the arrow, and the impact point will be adjusted to the left in the horizontal direction, L refers to left means to the left; vice versa.

How do you know if you have adjusted the impact point of the scope? We also need to calibrate the scope.

Aim at the target, aim at the bullseye, and shoot in groups of 5. For example: the impact points are scattered on the lower right side of the bulls-eye. At this time, the wind deflection knob can be adjusted in the horizontal direction. Rotating the knob in the L direction will move the impact point to the left in the horizontal direction until it is adjusted to be basically directly below the bulls-eye. ; Then adjust the distance compensation knob in the vertical direction. The impact point of the knob along the U direction will gradually move upward in the vertical direction until it basically coincides with the bullseye...

It is necessary to explain that the projectile production process is not up to standard, which will lead to irregular impact points. At this time, talking about the adjustment of the sight is basically a waste of effort. The precision of the toy itself is also directly related to the accuracy. The above-mentioned adjustment of sights is based on the relative consistency of ballistics

Through these methods, we can make the central scale line in the scope at the center of the lens, that is, the impact point of the scope is at the center of the lens.